f
|
| Golden
Dragon (dozer) |
| Jinma |
|
f
|
Golden Dragon
Crawler Bulldozers
|
NOTE: ONLY EPA APPROVED ENGINES CAN BE SOLD IN THE USA
|
KW-YCT306S-2 With Jiangdong engine, mechanical clutch,
steel track
KW-YCT306R-2 With Jiangdong engine, mechanical clutch, rubber belt track
KW-YCT306S-2A With Jiangdong EPA engine, mechanical clutch, steel track
KW-YCT306S-6 With Jiangdong engine, hydraulic clutch, cabin selectable,
steel track
KW-YCT306R-6 With Jiangdong engine, hydraulic clutch, rubber belt track, cabin selectable
KW- C T306S-6A With Jiangdong EPA engine, hydraulic clutch, cabin selectable,
steel track |
|
KW-YCT306S-2
Click image to enlarge
|
KW-YCT306S-5
Click image to enlarge
|
KW-YCT306R-6
Click image to enlarge
|
| USA BUYERS:
ONLY THESE EPA APPROVED ENGINES CAN BE SOLD IN THE USA |
|
KW-YCT306S-2A With Jiangdong EPA engine, mechanical clutch, steel track |
|
KW- C T306S-6A With Jiangdong EPA engine, hydraulic clutch, cabin selectable,
steel track |
| Specifications |
KW-YCT306S-2
KW-YCT306R-2
KW-YCT306S-2A (EPA)
|
KW-YCT306S-6
KW-YCT306R-6
KW- C T306S-6A (EPA)
|
| Engine |
TY395, 2.23L 35Hp |
| Type |
3 Cylinder, Direct Injection, Vertical Water Cooled |
| Bore / Stroke |
95mm / 105mm |
| Lubrication |
Full pressure by rotary pump |
| Oil Filter / Fuel Filter |
Spin on canister |
| Clutch |
Single dry disk diaphragm-spring |
Hydraulic Reverse Shuttle Clutch |
| Gearbox |
2-shaft, 8 forward + 2 reverse |
8 forward + 8 reverse |
| Blade
Lift |
raise,
hold, lower, float |
| Blade Angle |
right, hold, left |
| Blade Tilt |
right,
hold, left |
| Digging Depth |
154mm / 6in |
| Height of blade |
673mm / 26.5in |
| Blade lift height |
500mm / 19.68in |
| Blade capacity |
0.67m3 / .876 cubic yards |
| Steering |
Steering paddles integrated with Brake paddles |
| Brakes |
Band brakes, Paddle control |
| PTO |
mechanical dependent, 540rpm, 6 spline 35mm / 13/8in |
| Track Rollers |
Semi-rigid-off track frame, 5 + 1 (each side) |
| Track recoil system |
Helical spring, Screw adjusted |
| Width of track shoes |
300mm / 11.8in |
| Hydraulic Capacity |
25.2Lpm / 6.7gpm |
| Lifting capacity at 3-Point |
7350N / 1650lb |
| LWH (with blade and
ROPS) |
9.7' x 5.4' x 7.0' |
9.7' x 5.4' x 7.5' |
| Ground clearance |
245mm / 9.6in |
| Operating weight |
2830Kg / 6240lb |
| Max Drawbar pull |
2400Kg / 5290lb (steel track) 1960Kg / 5181lb (rubber track) |
|
|
)
)
)
